The OEM Motoric Valve Drive: 230 V 3-Point is an electromotive actuator of valves for heating and cooling systems. The OEM Motoric Valve Drive: 230 V 3-Point is controlled via a corresponding room thermostat. The actuator is equipped with a fixed connection line, an LED for function display as well as with a manual stroke setting which can be used e. g. for maintenance or for dismantling purposes. The predominant area of application is the energy-efficient control of water-bearing valves in the area of building services and automation.
Features
OEM Design
Stroke: 8.5 mm
Actuation force 100, 125, 150, 200 N (depending on the variant)
Function display via LED
Very short response times
Maximum energy efficiency due to complete motor control via micro controller.
Self-locking gear (de-energized) in all positions
Force-dependent deactivation in case of overload or when the final stop resp. the closing position is reached
Manual stroke setting
Valve adapter system
Simple plug-in installation without tools
100% protection in case of leaky valves (IP 54)
360° installation position
Low-noise and maintenance-free
High functional safety and long expected service life
Customer-specific actuation time set in factory
Actuation time 30, 15 s/mm (depending on the variant)
Technical Data
Operating voltage:
230 V AC, -10 % ... +10 %, 50 Hz
Operating power:
3.5 W
Max. power consumption:
< 20 mA
Standby power consumption:
< 5 mA
Stroke:
8.5 mm
Actuation force:
100, 125, 150, 200 N (depending on the variant)
Actuation time:
15, 30 s/mm (depending on the variant)
Connecting cable:
3 x 0,75 mm²
Cable length:
1000 mm
Casing colour:
white
Casing cover colour:
transparent
Dimensions (mm) H/B/T:
65 / 45 / 90
Product Contents
OEM Motoric Valve Drive: 230 V 3-Point in individual packaging
